Siding Eavestrough Calgary
By Alpine Eavestrough Admin Blog • General Information 0 Comments

Signs You Need Siding Work Done

Siding can help transform your home’s look and protect it from weather, but this exterior covering can wear down over time and require replacement. If you’re wondering whether you need it replaced, consider these signs that indicate it’s time to call a Calgary siding contractor.

Signs to Call a Calgary Siding Contractor

Siding Calgary
Siding of a home.

Cracks & Gaps Are Appearing

Cracks can be dangerous, letting water into the insides of your walls, potentially causing damage to your home, health and belongings. As a rule of thumb, any cracks in the siding should be repaired within 90 days to prevent huge problems. If you live in a region prone to earthquakes or have older siding cracked over time, look for gaps between your siding and windows or doors.

Broken or Loose Trim

Trim, such as molding, is placed on the exterior of your home to add a decorative touch and help maintain the integrity of your home exterior. Broken trim should be replaced, especially if it’s not secured with nails, because it can allow water to accumulate underneath and cause damage. If you want to know whether the trim needs replacing or not, check for broken nails and gaps between the siding and trim. 

Peeling Paint

Siding and trim lose their ability to protect your home from weather and other toxins, like mold and mildew, and will start to decay as you see chipping paint. Peeling paint can also be a sign it is rotting or becoming brittle. If you see peeling paint on your siding, look for cracks, gaps or other damage in addition to replacing the colour. 

Cracked or Broken Windows & Doors.

Windows and doors are more than just openings for light and keeping the outside world outside. Hinges, window glass, frames and other parts should be in good condition to keep the opening secure and standing strong. If you notice cracks or gaps in your exterior doors or windows or broken pieces such as handles, it’s time to call a siding contractor to replace what needs replacing before it causes damage.

Siding Is Coming Off Your Home’s Frame

Though the siding might be in good condition, it will start to come away from your home because of weakness or rot. The siding might not just be peeling or falling off, but actually being torn or coming away from your home, which can have serious implications. You could experience broken windows and doors if the siding comes loose, water infiltration that further damages your home and health issues like mold exposure that can make you sick. 

Rotten Wood & Rot Stains

Siding and trim also deteriorate from the chemical compounds in wood that cause decay, including wood rot and mold. The only way to know whether your siding is decaying naturally or needs replacement is by checking the quality of your wood. If you have damaged siding because of rotting wood, it’s time to replace what needs replacing before the rest of your home is affected.

Cleaning your eavestroughs is crucial to the safety of your home. If your home needs eavestrough repair, installation or maintenance, contact the professionals at Alpine Eavestrough. We’d love to hear from you.

Phone: 403-242-7868

Two men applying green paneling to a house
By Alpine Eavestrough Admin Uncategorized 0 Comments

How Much Does It Cost To Replace Siding?

No matter the quality of siding that your home boasts, there will likely still come a time when you will need to replace it. This can be the perfect opportunity to change the outward appearance of your house and perhaps even personalize it to your tastes.

However, as with any other renovation project, it’s important to have a handle on the financials and understand how much it will cost to replace your siding.

We break down how the type of materials you choose for your Calgary siding will impact the cost of your replacement.

Determining The Cost To Replace Siding

Vinyl Siding

Vinyl is one of the most popular siding options chosen by homeowners- and for good reason too! From a simply aesthetic standpoint, vinyl siding comes in numerous colours, allowing you to customize your home. From a more practical perspective, vinyl is dependable. Designed to withstand Canadian weather and any damage thrown at it, vinyl siding is durable. Additionally, it is flexible, allowing it to adjust to any foundational shifts instead of simply cracking.

In the world of siding, vinyl is arguably the most affordable option. The average price per square foot is typically around $6, but this number can go higher or lower depending on your choices.

James Hardie Siding

This particular option is a fibre cement material, made from a mix of cement, wood pulp, and silica. James Hardie board siding – Fiber cement siding has risen in popularity over the years due to its durability. Not only is it proven to hold up against hailstorms, but it is also fire and rot resistant. As well, you can customize their appearance. They are designed to replicate the look of wood, however, you can choose the aesthetic. Hardie board can reproduce any style, from planks to shingles, while also rocking practically any colour you’d like.

Two men applying green paneling to a house

Hardie board is more resilient than vinyl, which does mean the cost will be greater. On average, James Hardie siding costs 1.5 to 2 times more than vinyl. However, that initial investment will serve you longer down the line, reducing the likelihood of needing another siding replacement in your lifetime.

Engineered Wood Siding

A more cost-effective version of traditional wood siding, engineered wood is a mix of several different kinds of wood. Its design is to mimic the appearance of wood siding while being more reliable. Engineered wood is treated to protect against rot, moisture, and insects while also being sturdy enough to face off against Canadian winters.

The cost of engineered wood siding varies, depending on the type you select. Some can be competitively priced with vinyl siding, perhaps being a dollar or two more expensive per square foot. Others, however, can get quite costly, easily being $30 per square foot and having no problem going higher.

The cost to replace your siding will greatly depend on the materials you choose for your home. Don’t hesitate to contact a siding company in Calgary for a quote, allowing you to better plan your budget and feel confident moving forward.

Cleaning your eavestroughs is crucial to the safety of your home. If your home needs eavestrough repair, installation or maintenance, contact the professionals at Alpine Eavestrough. We’d love to hear from you.

Phone: 403-242-7868

Front View of blue house with siding in the suburbs
By Alpine Eavestrough Admin Uncategorized 0 Comments

What is Hardie Board Made Of?

When it comes time for you to replace the siding on your house, one of your primary concerns is making the most of the replacement. It’s not often a homeowner wants to pay for siding installation more often than they need to, so choosing which materials will best weather the Calgary snows and rains is an important decision to make.

Hardie board has long been an attractive option for siding. But what exactly is it?

We take a look at the composition of Hardie board and its benefits below.

Understanding Hardie Board

What is Hardie Board Made Of?

James Hardie board siding, created by James Hardie Building Products over 30 years ago, is made from a mix of cement, wood pulp, and silica. This creates a fibre cement that is more flexible and durable than most other sidings.

What are the Benefits of Hardie Board?

Fire Resistant

Thanks to the elements that make up Hardie board, this product may be the difference when a neighbouring fire encroaches your property.

Storm Resistant

Hardie board has the known ability to hold up against Alberta’s hailstorms. Its durability decreases the odds of you needing to replace your siding after a particularly nasty Calgary storm.

Side and real view of craftsman house

Appearance

Not only can you choose the colour of your Hardie board, but also the style. This product can be altered to mimic the siding option you’re interested in while also giving your home a unique wooden look.

Longevity

If Hardie board can stand up to fire and storms, it’s then safe to say that it’s able to last a good few decades. One of the most appealing features of Hardie board is that it’s long-lasting and relatively low-maintenance.

Are There Any Drawbacks to Hardie Board?

The only major downside to Hardie board is the cost. Hardie board is far heavier than the regular siding, so the labour costs will be greater when accounting for the speed at which the workers can reasonably go.

However, when you consider the amount of time that Hardie board will last on your home, you may find the initial cost a sound investment.

Contacting a siding company specializing in James Hardie siding is always a solid option when considering this siding style, as they will be able to offer advice more specific to your home.

Cleaning your eavestroughs is crucial to the safety of your home. If your home needs eavestrough repair, installation or maintenance, contact the professionals at Alpine Eavestrough. We’d love to hear from you.

Phone: 403-242-7868

Frozen Electrical Utility Meter
By Alpine Eavestrough Admin Blog 0 Comments

The Best Siding For Extreme Cold Weather

You have a lot of choices when it comes to choosing the siding material for your home. The list includes wood, aluminum, vinyl, and more. But it’s very important that you choose the right material if you live in a cold climate. Here are some of the best materials you can go with.

1.  Steel

Steel is one of the best materials for extremely cold climates. It will be resistant to warping, cracking, and swelling that other materials go through during the freeze-thaw cycle of winter. It also does not absorb moisture which is what tends to damage other siding materials over time.

With that said, it may not be your ideal choice as siding companies in Calgary will tell you that it’s one of the most expensive materials you can choose. But if you do want longevity and durability, it’s the perfect material.

2.  Fiber Cement

Fiber cement siding  is another great choice. It is not as durable as steel but it is far more durable than other materials like wood, brick, and aluminum. Fiber cement is made out of clay, cement, and sand. It does not absorb moisture and will not split easily.

Plumber pushing a plunger drain into drain to unclog it

It is cheaper than steel but it still costs more than the other materials that are commonly used for siding. It’s a solid choice if you want to install siding that can deal with extremely cold weather and temperature fluctuations.

3.  Brick and Stone Siding

While brick and stone isn’t the most ideal material for cold weather conditions, it’s still a solid contender. The reason why is because it is still quite durable and provides great insulation for your home. It is also one of the more affordable siding options for dealing with extremely cold weather conditions.

People also tend to like brick and stone siding due to the beautiful designs that are available. They also appreciate the material’s durability. You do, however, have to be on top of checking for cracks and maintain the siding well. The winter season can do some damage to the material.

These are some of the best choices for siding material. If you’re looking for other options, talk to your local siding companies in Calgary. You can get a better idea of what’s available based on cost, durability, and weather-resistance.

Cleaning your eavestroughs is crucial to the safety of your home. If your home needs eavestrough repair, installation or maintenance, contact the professionals at Alpine Eavestrough. We’d love to hear from you.

Phone: 403-242-7868

Green and Brown House of Stone, Cedar, Vinyl Siding
By Alpine Eavestrough Admin Uncategorized 0 Comments

How To Install Vinyl Siding Around Windows

Caulking window

Install Your J Molding

Vinyl siding installation around windows is a crucial step in enhancing the aesthetic appeal and functionality of your home. By properly installing Calgary vinyl siding around windows, you can ensure a durable and weather-resistant barrier that protects your home from the elements. This article provides essential guidance on how to install vinyl siding around windows, ensuring a professional and seamless finish. Discover the techniques and best practices to achieve a visually pleasing and long-lasting result.

When installing vinyl siding around windows, it is crucial to pay attention to the details to ensure a proper fit and secure installation. By following the recommended steps and techniques, you can seamlessly blend the siding with your windows, creating a cohesive and visually appealing appearance.

One key aspect to consider during vinyl siding installation around windows is the integration of J-channel and corner posts. These elements play a crucial role in achieving a professional finish and maintaining the structural integrity of the siding. Properly installing and sealing these components will ensure that your vinyl siding remains securely in place and offers excellent protection against water infiltration.

Pro Tip: Before starting the installation process, make sure to measure and trim the vinyl siding accurately to ensure a perfect fit around your windows. Taking the time to properly prepare and measure will result in a cleaner and more seamless installation.

Confirming Building Preparations

Installing vinyl siding around windows requires confirming building preparations. This involves assessing the readiness of the building before the installation process. Here is a step-by-step guide to confirming building preparations:

  1. Inspect the window frame: Check for any damage or rotting in the window frame. Repair or replace any damaged sections before installing the vinyl siding.
  2. Measure the window openings: Accurately measure the dimensions of each window opening. This will ensure that you cut the vinyl siding panels to the correct size for a perfect fit.
  3. Check for level and plumb: Ensure that the window openings are level and plumb. Use a level to check both horizontally and vertically. Adjust the window frame if necessary to ensure a proper fit of the vinyl siding.
  4. Remove any obstacles: Clear the area around the windows of any obstacles, such as plants or debris, which could hinder the installation process. This will make it easier to work and ensure a clean finish.
  5. Apply weather-resistant barrier: Install a weather-resistant barrier around the windows to provide added protection against moisture. This barrier acts as an extra layer of defense and helps prevent water infiltration.

In addition to these steps, it is important to note that proper building preparations ensure a smooth and successful vinyl siding installation. By confirming that the window frames are in good condition, measuring accurately, checking for level and plumb, removing obstacles, and applying a weather-resistant barrier, you create a solid foundation for the installation process.

To further enhance the installation, here are some suggestions:

  • Use quality materials: Invest in high-quality vinyl siding and weather-resistant barrier materials. This will ensure durability and longevity.
  • Follow manufacturer guidelines: Adhere to the manufacturer’s instructions and recommendations throughout the installation process. This will help you achieve the best results and avoid any potential issues.
  • Seek professional help if needed: If you are unsure about any aspect of the installation process, it is advisable to seek assistance from a professional contractor. They have the expertise and experience to handle the job effectively.

By following these suggestions and confirming the building preparations, you can ensure a successful vinyl siding installation around your windows.

Installing Bottom J-Channel

Installing Bottom J-Channel: Step-by-Step Guide

  1. Prepare the area around the windows
    • Remove any existing siding and trim around the windows to expose the bare wall.
    • Ensure that the wall surface is clean and free from any debris or obstructions.
  2. Measure and cut the J-channel pieces
    • Take precise measurements of the sides and bottom of the window.
    • Using those measurements, cut the J-channel pieces to fit around the window, leaving a 1/4-inch gap for expansion.
  3. Attach the J-channel to the wall
    • Start by nailing the J-channel along the bottom of the window, aligning it with the bottom edge of the window sill.
    • Secure the J-channel to the wall using nails or screws, making sure it is level and plumb.
    • Repeat the process for the sides of the window, overlapping the J-channel pieces at the corners to create a seamless look.

Important note: Ensure that the bottom J-channel is installed properly to prevent water infiltration and ensure a secure attachment for the siding.

Did you know? According to the article “HOW TO INSTALL VINYL SIDING AROUND WINDOWS,” proper installation of the bottom J-channel is crucial for a professional-looking and long-lasting vinyl siding project.

Installing Side J-Channels

Installing Side J-Channels is a crucial step when it comes to installing vinyl siding around windows. This process ensures a seamless and professional finish to your siding project. Follow these 5 simple steps to successfully install side J-channels:

  1. Measure and cut: Begin by measuring the length of each side of the window where you will be installing the J-channel. Use a saw or tin snips to cut the J-channel to the appropriate length.
  2. Attach the bottom piece: Start by inserting the bottom piece of the J-channel under the siding, aligning it with the bottom edge of the window. Secure it in place using nails or screws, ensuring it is level and straight.
  3. Install the side pieces: Take the side pieces of the J-channel and slide them into place, making sure they fit snugly against the window frame. Use nails or screws to secure them into position, ensuring they are level and straight.
  4. Cut and install the top piece: Measure the length needed for the top piece of the J-channel and cut it to size. Insert it over the side pieces, making sure it is flush with the top edge of the window. Secure it in place with nails or screws, ensuring it is level and straight.
  5. Seal and finish: To provide added protection against moisture, seal all the joints and gaps with caulk. Once the caulk is dry, your J-channel installation is complete, and you can proceed with installing the vinyl siding around the windows.

In addition, make sure to choose J-channels that match the color and style of your vinyl siding for a cohesive look. By following these steps, you can achieve a professional and seamless installation of J-channels for your vinyl siding project.

When it comes to the history of installing side J-channels, it has been a commonly used technique for decades in the construction industry. The purpose of J-channels is to provide a neat and finished appearance to the edges of windows and ensure the siding is securely attached. The process has evolved over time, with advancements in materials and installation techniques, resulting in easier and more efficient installations. Today, installing side J-channels is a standard practice in vinyl siding installation, contributing to the overall quality and aesthetic appeal of homes and buildings.

Installing Drip Edge

  1. Measure and Cut: Measure the length of the window trim and cut the drip edge accordingly using tin snips. Ensure that the drip edge overlaps the corner trims.
  2. Position and Secure: Position the drip edge along the top edge of the window trim, making sure it extends beyond the corner trims. Use roofing nails or stainless steel screws to secure the drip edge in place.
  3. Attach to Siding: Slide the vinyl siding panels onto the drip edge, ensuring a snug fit. Make sure the siding panels overlap the drip edge and are properly locked in place.
  4. Secure the Bottom Edge: Secure the bottom edge of the siding panels by inserting the bottom part into the J-channel or by using a utility knife to score and snap the bottom edge onto the drip edge.

Remember, installing drip edge is a crucial step in protecting your windows from moisture damage.

Installing Siding Courses

  1. Measure and cut the siding: Use a tape measure to determine the length needed, then cut the vinyl siding using a utility knife.
  2. Prepare the area: Remove any existing siding or trim around the windows. Ensure that the area is clean and free of debris.
  3. Start at the bottom: Begin installing the siding courses at the bottom of the window. Align the first piece with the bottom edge of the window and secure it to the wall with nails or screws.
  4. Continue upwards: Install the subsequent siding courses, overlapping each piece. Make sure they are level and straight.
  5. Trim as needed: Trim the top piece of siding to fit around the top of the window. Use a snap-lock punch tool to create the necessary tabs for a secure fit.
  6. Complete the installation: Repeat the process for all windows, ensuring that each siding course is securely fastened and properly aligned.

Additionally, it is crucial to note the importance of using the right tools and following manufacturer instructions for a successful installation. Remember to handle the vinyl siding with care to prevent any damage during the process.

Following these steps will provide a seamless and visually appealing installation of siding courses around your windows.

Conclusion

Vinyl siding installation around windows is a crucial step in achieving an aesthetically pleasing and durable home exterior. By following the steps outlined in the reference data, you can ensure a professional and seamless finish.

  1. Take the time to carefully measure, cut, and secure the vinyl siding around each window, paying attention to all the necessary details.
  2. Additionally, consider incorporating unique finishing touches that enhance the overall appearance and functionality of your window sidings.
  3. By approaching this task with precision and care, you can achieve a polished and long-lasting result.

Don’t miss out on the opportunity to enhance your home’s curb appeal and protect it from the elements – get started on your vinyl siding installation around windows today.

Some Facts About How To Install Vinyl Siding Around Windows:

  • ✅ It is important to confirm that building paper is in place beneath the window’s nailing fin. (Source: Team Research)
  • ✅ The flashing at the bottom of the window should extend beyond the window’s corners and overlap the nailing hem of the siding course below the window. (Source: Team Research)
  • ✅ Window flashing should extend 5 inches from the sides and 2 inches from the top and bottom. (Source: Team Research)
  • ✅ J-channels and drip edges are the two types of siding trim pieces used for installing vinyl siding around windows. (Source: Team Research)
  • ✅ It is important to leave a 1/4 inch gap between siding pieces and J-channels to allow for expansion. (Source: Team Research)

FAQs about How To Install Vinyl Siding Around Windows

How do I install vinyl siding around windows?

To install vinyl siding around windows, follow these steps:

  1. Confirm that building paper is in place beneath the window’s nailing fin.
  2. Confirm that flashing at the bottom of the window extends beyond the window’s corners. It should overlap the nailing hem of the siding course below the window.
  3. Confirm that window flashing extends 5 inches from the sides and 2 inches from the top and bottom.
  4. Cut a J-channel wide enough to go across the bottom of the window frame and the J-channels on each side of the window.
  5. Position the J-channel piece so that the bottom of the “J” touches the bottom of the frame.
  6. Mark the edges of the window frame on the J-channel.
  7. Snip the bottom edges of the J-channel up to the marks to form little tabs.
  8. Cut off the tabs.
  9. Nail the bottom J-channel below the frame. All nailing should be done with roofing nails. Leave nails a bit loose to allow for expansion.
  10. Get a piece of J-channel a few inches longer than the side of the window.
  11. Mark a 45-degree angle with the carpenter’s square from the outer edge of the J-channel up to its inner edge.
  12. Snip along the 45-degree mark.
  13. Trim straight across the nailing fin of the J-channel to where the 45-degree cut meets the inner edge.
  14. Cut off extra nailing fin but leave the tab at the back of the J-channel.
  15. Set the J-channel against the window frame and on the bottom J-channel. The 45-degree cut will form a mitered joint, and the tab will slide beneath the “J” of the bottom J-channel.
  16. Mark the side J-channel at the top edge of the window frame.
  17. Trim the side J-channel at the mark and nail in place.
  18. Repeat steps 10 through 17 for the other side.
  19. Now you need a drip edge piece of trim to continue learning how to install vinyl siding around windows.
  20. Measure and cut a drip edge the width of the window plus both J-channels along the side.
  21. Set the drip edge in place and mark where the tops of the J-channels meet the drip edge.
  22. Cut tabs from the drip edge and bend them down into the J-channels.
  23. Nail drip edge over window with tabs fitted into J-channels.
  24. Cut a J-channel piece the width of the drip edge.
  25. Cut tabs in the J-channel to fit over the drip edge tabs and into the side J-channels.
  26. Nail the top J-channel into place.
  27. As you lay courses of siding, cut them to fit around the window behind the J-channel edges.
  28. Leave 1/4 edge of space between siding pieces and J-channels to allow for expansion.

Why is it important to pay attention to edges and seams when installing vinyl siding around windows?

Paying attention to edges and seams is crucial when installing vinyl siding around windows because they are potential areas where water can penetrate. Properly sealing these areas will prevent water damage and ensure a watertight installation.

What are the two types of siding trim pieces used when installing vinyl siding around windows?

The two types of siding trim pieces used when installing vinyl siding around windows are J-channels and drip edges. J-channels are used to trim the sides and bottom of the window frame, while drip edges are used to create a watertight seal over the top of the window.

What should I confirm before installing vinyl siding around windows?

Before installing vinyl siding around windows, you should confirm the following:

  • Building paper is in place beneath the window’s nailing fin.
  • Flashing at the bottom of the window extends beyond the window’s corners and overlaps the nailing hem of the siding course below the window.
  • Window flashing extends 5 inches from the sides and 2 inches from the top and bottom.

How do I create a mitered joint when installing vinyl siding around windows?

To create a mitered joint when installing vinyl siding around windows, follow these steps:

  1. Get a piece of J-channel a few inches longer than the side of the window.
  2. Mark a 45-degree angle with the carpenter’s square from the outer edge of the J-channel up to its inner edge.
  3. Snip along the 45-degree mark.
  4. Trim straight across the nailing fin of the J-channel to where the 45-degree cut meets the inner edge.
  5. Cut off extra nailing fin but leave the tab at the back of the J-channel.
  6. Set the J-channel against the window frame and on the bottom J-channel. The 45-degree cut will form a mitered joint, and the tab will slide beneath the “J” of the bottom J-channel.

What is the purpose of a drip edge when installing vinyl siding around windows?

A drip edge is used when installing vinyl siding around windows to create a watertight seal over the top of the window. It helps to channel water away from the window and prevent water from penetrating the siding and causing damage.

Cleaning your eavestroughs is crucial to the safety of your home. If your home needs eavestrough repair, installation or maintenance, contact the professionals at Alpine Eavestrough. We’d love to hear from you.

Phone: 403-242-7868

Multicolored vinyl siding with simulated wood texture. Plastic wall covering for exterior decoration of house. Abstract background for your design
By Alpine Eavestrough Admin Uncategorized • 0 Comments

The Best Vinyl Siding on the Market

The path to finding the best vinyl siding on the market is not a straightforward one. Indeed, there are many top brands that compete on relatively equal footing for the title. Plus, the criteria for what constitutes “best” in terms of siding is varied and immeasurable. Therefore, you need not look for the best vinyl siding, but rather the top contenders.

Many siding companies in Calgary and elsewhere are proud of the materials they produce and stand behind their outstanding quality, but we will only look at three of them today. These companies are James Hardie, Alcoa and CertainTeed. Each one of these magnificent manufacturers provides something unique and valuable with their particular brand of siding, and they all deserve a portion of your attention.

Here Are Three Excellent Siding Companies, Calgary!

James Hardie

Our first siding company is James Hardie board siding . They produce a fibre cement siding that mimics traditional vinyl siding’s look and feel, but with a more natural look. Plus, the material difference allows them to offer exceptional variety in colour, which is fantastic for people looking to find a specific colour.

However, James Hardie also provides other benefits. For example, the fibre cement is more durable than vinyl, making it easier to clean with pressure washing equipment and heavier-duty alternatives to handwashing. As well, many people celebrate the material as an excellent replacement for cedar boards because of the similarities in texture and colour.

 

Alcoa

Alcoa is a business with a very long history. They began in 1888 and continue to provide exceptional quality through stylish, colourful product offerings. However, it is the environmental considerations of this company that make them a contender for the best vinyl siding on the market.

Firstly, all of their products are recycled material, which dramatically reduces their environmental impact. Additionally, they engineer energy-efficiency into all of their siding materials. This method is a boon for the homeowner and builder alike. Overall, Alcoa’s classic architectural look makes them a healthy all-around choice for siding companies in Calgary. 

CertainTeed

The final company on our list is CertainTeed. They are well known for their unique shapes, such as their half round cedar shingling. Plus, they also have an environmentally-conscious manufacturing approach, which can be seen in their new solar roofing tiles and National Green Building Standards (NGBS) approval. 

However, the benefits do not end there for CertainTeed. They differentiate themselves from the competition with affordable pricing. Although that means you may end up getting what you pay for in some circumstances, they are a great choice for building contractors throughout the country.  

An African-American man on a ladder and fixing vinyl siding on a house
Alpine Exteriors – Siding and Roofing 148 Fairview Dr SE, Calgary, AB T2H 1B2 +14032427868

Cleaning your eavestroughs is crucial to the safety of your home. If your home needs eavestrough repair, installation or maintenance, contact the professionals at Alpine Eavestrough. We’d love to hear from you.

Phone: 403-242-7868

Alpine Exteriors – Siding and Roofing 148 Fairview Dr SE, Calgary, AB T2H 1B2 +14032427868
Maintenance on the roof
By Alpine Eavestrough Admin Uncategorized 0 Comments

How to Clean Your Eavestrough

Eavestroughs in Calgary are an essential part of home construction. They prevent the drainage of water and snowmelt around the perimeter of the building, which has cumulatively disastrous effects. However, there is a significant downside to this fantastic modern innovation.

Indeed, the downside of eavestroughs in Calgary is cleaning them. However, you don’t have to make the process more painful or unpleasant than necessary. Instead, consider using our guide below to make it simple, straightforward, and long-lasting. 

The first step in cleaning your Calgary eavestroughs is gathering the materials. For this project, you will need the following:

  • Bucket
  • Biodegradable bag
  • Ladder
  • Gloves
  • Spade/ scoop (optional)

The Calgary Eavestrough Cleaning Process

  1. Preparing Your Ladder

The most critical part of cleaning your eavestroughs is setting up your ladder safely. Many injuries occur each year because of improper ladder safety techniques. For instance, between 2016 to 2018, Alberta had an average of 5,907 falls to a lower level with resulting injuries.

Therefore, when preparing your ladder, keep a few key tips in mind. First, always tie off your ladder to a sturdy object on the building. Secondly, if you are using an A-frame ladder, ensure its full extension and the secondary supports are locked in place. Or, if you are using an extension ladder, ensure the sliding locks are in place. Additionally, for extension ladders, you must place the bottom of the ladder four metres out from the building for every one metre of vertical distance.

Man up ladder cleaning leafs out of gutter on house

  1. Cleaning Your Eavestroughs

Again, when cleaning your eavestroughs, remember the crucial importance of ladder safety. Gather the debris and detritus into your bucket, lined with your biodegradable bag. But, don’t overextend your reach past the confines of your ladder. Remember: 3 points of contact. This rule-of-thumb states that you should always have 3 limbs touching your ladder at any given time—for example, two legs and one arm. 

After you clean a section of all the debris, descend your ladder and set it up in a new position. Repeat this process until you have completed a circuit around your home. Also, pay extra attention to the downspout connections. As the main travel area, they are the most prone to blockage and the most important to keep clear.

  1. Disposing of the Waste

Finally, once you finish cleaning the eavestroughs around your home, you need to dispose of the waste. If you have been using a biodegradable bag, simply seal it and add it to your compost bin for regular collection. Otherwise, empty the organic waste into your compost and clean out your holding container. 

Clean Your Calgary Eavestroughs Today!

Now you know the method and steps necessary to get your eavestroughs looking great and functioning properly. However, if learning about this process has made you disinterested in actually performing the work, that is no problem. Give us a call, and our friendly, professional staff will make the visit and complete the work for you. 

Cleaning your eavestroughs is crucial to the safety of your home. If your home needs eavestrough repair, installation or maintenance, contact the professionals at Alpine Eavestrough. We’d love to hear from you.

Phone: 403-242-7868

Eavestrough Calgary
By Alpine Eavestrough Admin Blog 0 Comments

The Cost to Install Eavestroughs in Calgary

There are many different types of eavestrough in Calgary, and each of them provides their own unique benefits. However, each of them will also cost money, and this is an essential consideration for you to make, as nobody wants to spend their money unnecessarily.

However, for you to get the ultimate value from your eavestroughs Calgary, you will first need to understand the relevant factors affecting the cost. These factors include the company, type of eavestrough, like Alpine Exteriors – Siding and Roofing and the total length of the eavestrough. For further information, you can read on below.

The Consideration Factors of Calgary Eavestroughs

The Company

One of the more major factors for your consideration, when it comes to eavestrough installation, is the company performing the work. For example, if you choose the cheapest “per linear foot” price, your prospective companies offer, you may think that you have saved a bunch of money as a savvy shopper. However, much like other products and services, cheaping out on the company will potentially lead to issues in the future.

As far as it concerns eavestrough installation, choosing the wrong company can lead to issues with the water not draining away from your house correctly or the eavestroughs falling off the roof prematurely. Naturally, you don’t want your eavestroughs ever to fall off, but poor shoring and fasteners can hasten this process. 

Type of Eavestrough 

Another way that your eavestrough installation cost will vary is through the type of eavestrough. Not all material is created equal, and finding the right balance of strength and affordability can be a challenge. Typically, vinyl and aluminum are considered the lower end of these factors. Conversely, wood and copper are much more expensive but provide extra durability and a better aesthetic value than the former. 

Total Length of Eavestrough

The total length of your eavestrough is perhaps the most obvious way in which the cost will differ. For instance, if you are planning only to perform a small repair, the price will not be that exorbitant. However, if you are entirely installing your eavestroughs, the cost will undoubtedly be more expensive.

The Cost of Calgary Eavestroughs

The cost of eavestroughs in Calgary, broadly speaking, varies from $3-$26 per linear foot. However, as mentioned above, you are probably looking at the lower end if you are installing vinyl, and at the higher end if you are using copper or wood. 

 

 

Cleaning your eavestroughs is crucial to the safety of your home. If your home needs eavestrough repair, installation or maintenance, contact the professionals at Alpine Eavestrough. We’d love to hear from you.

Phone: 403-242-7868

eavestrough-calgary
By Alpine Eavestrough Admin Blog 0 Comments

The Best Type of Eavestroughs to Buy

When looking for eavestroughs in Calgary, there are many options available. Typically, you are selecting for material, and not size or shape, which is actually a boon. When you dig into the math of eavestroughs, you will quickly find that there is a substantial amount of calculations that need to occur. 

 

For instance, eavestroughs in Calgary cannot be placed level, and a common rule of thumb is a quarter-inch of decline for every 10 feet of eavestrough. Although, it gets more complicated still when it comes to the correct placement of anchors, the necessity of proper downspout allocation, and many more configurations that were perhaps unexpected for water movement around the roof of your home. 

 

Either way, there are good materials, based on your budget, available for your consideration:

 

Common Calgary Eavestrough Materials

If you are on a limited budget, there are typically only two options available for your eavestroughs in Calgary: vinyl and aluminum. Both have their pros and cons, but they share the overwhelming advantage of being cheaper than the alternatives. More on that later.

 

Aluminum eavestroughs are a great option because of their sturdiness and customization. Aluminum offers a strength that vinyl lacks, which means it is easier to go up and perform repairs or cleanings, with less risk of damaging the eavestrough. Furthermore, the customization aspect is related to the ease of painting each material, and aluminum is much better, surface-wise, for painting. 

eavestroughs in Calgary

However, you should not discount the virtues of vinyl eavestroughs either. Vinyl is lightweight, slightly cheaper than aluminum, and it is relatively easy to install. Yes, indeed, you can’t always get the perfect colour for your vinyl eavestroughs, but that doesn’t mean that the available options are unattractive in any way. 

 

Either way, both options present a good variety of options and choices for you to consider, and you are sure to find something that really stands out if you look hard enough. Although, you could consider the following options if your budget allows it, such as:

 

Uncommon Types of Calgary Eavestrough

Wood, copper, and galvanized steel are also available material options. However, you should note that copper is currently the most expensive material available. Yes, it will last for a long time, requires little maintenance, and is a beautiful addition to your home, but it is reserved for a particular class of luxury, typically.

 

Alternatively, galvanized steel is probably the most frugal option of these three materials, but it has a particular issue. This is the presence of rust, which will inevitably penetrate the thin, zinc layer that characterizes galvanized steel and cause the aesthetics to suffer. Plus, given enough time, the corrosion will eventually cause holes and structural issues in your eavestroughs, but you can avoid this with proper maintenance and care.

 

Finally, wood is the last option that people can consider when looking for Calgary eavestroughs. Wood is elegant, timeless, and classic, but it also features all of the familiar tropes people assume with traditional construction. That is to say that it will break down quicker, is very expensive to purchase and install, and has the least amount of malleability for placement onto the structure of your home. Super gorgeous, though, but usually, it is best for traditional homes with a large eavestrough budget.

 

Cleaning your eavestroughs is crucial to the safety of your home. If your home needs eavestrough repair, installation or maintenance, contact the professionals at Alpine Eavestrough. We’d love to hear from you.

Phone: 403-242-7868

Torrential Summer Rain Storm Water Overflowing Roof Gutters
By Alpine Eavestrough Admin Blog 0 Comments

Why You Should Check Your Eavestrough After Winter & Before Summer

Most homes have eavestroughs in order to prevent unnecessary wear and tear on their roof. This system of water management offers a proper way for water to flow throughout the yard, and in some cases, can be modified or installed to repurpose the water to hydrate a garden area. 

Furthermore, Calgary eavestroughs are designed to stand up to heavy snowfall, and rains as well. This means that your roof, when properly installed, will direct the water to the eavestroughs and not hold the weight of it on the roof itself. This is great because roofs are typically not designed to be load-bearing structures, but rather as a protective system for the interior of your home or business. 

However, for all of the benefits of Calgary eavestroughs, there is still necessary maintenance that must be performed. This not only ensures that your roof and eavestroughs will function properly throughout the year, but it will also give you the opportunity to remove any dirt, leaves, or gunk that has accumulated in them. This prevents blockages and weight issues which further the performance, year over year.

When is the Best Time to Check your Eavesthroughs?

When checking your eavestroughs in Calgary, you must consider the best time of the year. The best time of year to do this is based on a variety of factors, but it is safe to say that if there has been heavy rain or snowfall season, it is a good time. This is because you will be checking at the time when they are most often being used, and it is a time critical enough that you do not want them to fail midseason.

Wooden house with rain gutter in winter

This is why checking your Calgary eavestroughs in Spring, before summer and after winter, is the best time. Not only will you be able to clean out whatever dirt and grime accumulated with the snow, but you will also be able to leave it for the remainder of the year as it will be clean for summer and fall. 

Yes, there is some logic to checking them in the autumn period, but this is also shortsighted. You can remove the fallen leaves that are common with the turn of the season, but it is likely more will accumulate during the fall season as they are just blowing around in earnest. Instead, waiting for the layers of winter snowfall to capture the leaves that are stuck means you clean not only the dirt and grime but leaves as well. 

Some people wish to clean their own Calgary eavestroughs, and if you have the skill and wherewithal for this task it can be an enjoyable experience. However, for the busiest among us, consulting a local eavestrough company can save time and effort better spent on other projects.

 

Cleaning your eavestroughs is crucial to the safety of your home. If your home needs eavestrough repair, installation or maintenance, contact the professionals at Alpine Eavestrough. We’d love to hear from you.

Phone: 403-242-7868